SILICONE SLEEVES FOR MARINE ENGINE EXHAUST 500
ONLINE CATALOGUE › HOSES › Silicone rubber hoses and sleeves
Download sheet in pdf format
Code: 500
Silicone sleeves recommended for marine use as an anti-vibration connection of COMBUSTED AND WET gas exhaust systems FOR VESSELS OVER 24 METERS from the engine exhaust manifold to the hull or to marine exhaust fittings.
Construction: VMQ Silicone
External appearance: Smooth blue color or with one or more corrugations on request.
Reinforcement: several layers of polyester fabric. Steel spiral (for type R2 tubes).
External appearance: Smooth blue color or with one or more corrugations on request.
Reinforcement: several layers of polyester fabric. Steel spiral (for type R2 tubes).
Internal appearance: smooth and red.
Operating temperature: -55° +180°C
Length: proportional to the diameter or upon customer request
Certifications upon prior request during the offer phase. This product can have on request the type approval certificate (TAC) number 12/00066 issued by Lloyd's Register which certifies compliance with SAE J2006 for the three styles R1, R2 and R3 classification in SAE J2006-ISO 13363 for silicone parts used in the marine wet waste system.
R1 refers to tubes with textile reinforcement only
R2 refers to hoses with textile reinforcement and steel spiral
R3 refers to custom pipes such as bends, reductions or special shapes with reinforcements
Certifications upon prior request during the offer phase. This product can have on request the type approval certificate (TAC) number 12/00066 issued by Lloyd's Register which certifies compliance with SAE J2006 for the three styles R1, R2 and R3 classification in SAE J2006-ISO 13363 for silicone parts used in the marine wet waste system.
R1 refers to tubes with textile reinforcement only
R2 refers to hoses with textile reinforcement and steel spiral
R3 refers to custom pipes such as bends, reductions or special shapes with reinforcements
| STRAIGHT PIPES L.1000mm | |
| Internal diameter | Wall thickness |
| mm | mm |
| 127 | 8 |
| 152 | 7 |
| 168 | 8 |
| 205 | 8 |
| 220 | 8 |
| 254 | 8 |
| 256 | 8 |
| 270 | 8 |
| 305 | 8 |
| 323 | 8 |
| 355 | 8 |
| 406 | 8 |
| SLEEVES WITH SINGLE WAVE | ||
| Øi int.xLength. | extermity | Wall thickness |
| mm | mm | mm |
| 48x130 | 46 | 5 |
| 51x152 | 60 | 6 |
| 54x150 | 70 | 6 |
| 76x180 | 70 | 6 |
| 89x200 | 70 | 6 |
| 102x200 | 70 | 7 |
| 108x200 | 70 | 7 |
| 114x200 | 70 | 8 |
| 128x200 | 70 | 8 |
| 133x200 | 75 | 8 |
| 140x200 | 95 | 8 |
| 152x200 | 115 | 8 |
| 168x200 | 115 | 8 |
| 205x250 | 115 | 8 |
| 220x300 | 115 | 8 |
| 254x300 | 115 | 8 |
| 270x300 | 115 | 8 |
| 305x300 | 115 | 8 |
| 325x300 | 115 | 8 |
| 355x300 | 115 | 8 |
| 406x400 | 165 | 8 |
| SLEEVES WITH DOUBLE WAVE | ||
| Ø internal x Length | smooth ends | Thickness wall |
| mm | mm | mm |
| 152x355 | 125 | 8 |
| 205x355 | 125 | 8 |
| 220x355 | 125 | 8 |
| 254x355 | 125 | 8 |
| 305x355 | 125 | 8 |
| 355x355 | 125 | 8 |
| 406x355 | 125 | 8 |
| 508x300 | 97.5 | 8 |
| 508X350 | 122.5 | 8 |
| 508X470 | 182.5 | 8 |